What are the main features of the silent pulley?

The silent pulley is a device used to fix the guide plate and guide rail. It is composed of two or three sliding parts: one is installed on the bracket; The other is installed on the adjustable support shaft (roller). When moving the guide plate, adjust the bolt on the support shaft to change its position to control the position and direction of the guide plate. What are the main features of silent pulley?
1. Simple and reliable structure: due to the use of new bearing materials and special processing technology, the product life is greatly extended and the reliability is high; With long service life, the bearing is maintained with imported wear-resistant lubricant to ensure long-term operation of the product; Low noise, special oil seal design, effectively reduce noise.
2. High precision: the silent pulley is manufactured by the machining center, ensuring the high quality of the product; No pollution, use environment-friendly lubricating oil to avoid the secondary pollution of traditional oil to the environment; It is applicable to a wide range of products with different specifications and models. It has certain safety standards. All components have passed strict test standards and are manufactured according to relevant safety requirements.
3. Scope of application: The silent pulley is widely used in the assembly of various small workpieces in electronic and electrical equipment, mechanical parts and other industries.
4. Precautions: Please carefully read the regulations and requirements in this manual before using the silent pulley; Do not put your hands inside the pulley; Overloading is strictly prohibited; It is forbidden to strike with a hammer; Please avoid collision with other objects when using.
5. Installation method: When installing the silent pulley, select the appropriate hole diameter according to its needs; During installation, the base shall be fixed on the table and fixed with screws. (Please note that the thickness of the base should be slightly greater than the width of the slider); When installing the pulley top cover, be sure to cover the dust cover, and then unscrew the lock catch to complete the assembly. After installation, it is necessary to turn on the power switch, press the button to start the motor and run the silent pulley to the normal speed