How to repair the broken wardrobe pulley of sliding door

At present, the mainstream of household consumption is more personalized, simple and easy to use. For example, the sliding door type wardrobe, which is pushed and pulled frequently every day, will more or less have problems such as damage to the wardrobe pulley for a long time, so what if the wardrobe pulley is damaged? Next, Opec will share with you the maintenance methods of the wardrobe pulley. If you are interested, please continue to read.
1、 First of all, we should check the cause of the damage of the wardrobe pulley and find the corresponding repair method according to the cause.
1. Check the track for debris. Clean up if any. If it is not an adjustable tanker.
2. Check whether the oil tanker of the wardrobe pulley is worn. Adjust the slide rail below. One of the screws can be adjusted.
3. Slightly more complex inspection, check whether there is any wood material falling in, especially the sawdust material mixed with white latex, which can catch the crack and then lock the screw. The sliding door wardrobe product will have a gap. Generally, the outer pulley needs a 15mm gap. This gap affects the sealing of the sliding door. Sand and dust are easy to invade, and the wardrobe is easy to accumulate dust.
2、 Replacement method of wardrobe pulley:
(1) Remove the frame and lower seal and fix them with fixing screws.
(2) Install a fixed frame on the floor and a sliding plate on the top of the frame.
(3) Take another door frame, clip it into the arranged sliding door plate, and fix the lower seal with the door frame with screws.
(4) Clip in the upper seal, fix it with screws, and fix the upper wardrobe pulley.
(5) After the upper and lower screws are fixed, fix the lower pulley in the lower seal with the traction screw to complete the installation.
Note: When installing the lower pulley, the pulley spring is inward.
The above is the inspection and replacement method of wardrobe pulley shared by Opaque. If your wardrobe sliding door is faulty, you can try the following inspection and maintenance methods:
Maintenance method of wardrobe sliding door
1. There is a screw at the top of the lifting rail sliding door to fix the slide rail. You can remove the screws at both ends of the door so that the door can be lifted as high as possible and fixed. Next, you can use a screwdriver to slide out the slide rail in the opposite direction of the rail. When the two wardrobe pulleys are separated, the door will fall off automatically. Accessories for sliding doors and windows: the wardrobe pulley is a few cents cheaper and a few yuan more expensive. Some hollow glass doors and windows with broken bridges cost six or seven yuan each.
2. Keep away from the pulley and do not roll in the direction of the pulley, so you will find a small track on the top of the sliding door, which is the cause of the wardrobe failure. Try to fix the door by yourself, and then control the device according to the original method and install it back.
3. But if it really can't be solved, find after-sales service to solve the problem for you. Don't repair a door yourself to save maintenance costs! In the hanging rail sliding door, it is necessary to ensure the width of the left and right doors. At the same time, in the equipment, it should also pay attention to whether the hanging door has a large noise. Therefore, when selecting the hanging rail sliding door, it is necessary to select the better quality to avoid inconvenience to the future use. Follow Opec to learn more about wardrobe pulley.