How to install the wardrobe pulley?

The wardrobe is one of the furniture that we will have in our bedroom, and now most of the wardrobes are equipped with wardrobe pulleys, which can make our living and rest space more spacious, so it has won the favor of many people. The wardrobe pulley is an important accessory in the wardrobe. How to install the specific wardrobe pulley? Let's take a look.
How to install the wardrobe pulley
1. Take one without frame and lower seal and fix it with fixing screws
2. Place the fixed frame on the ground, and then place the moving door panel on the frame
3. Take another frame and clip it into the aligned door panel, and fix the lower seal and frame with screws
4. Clamp and seal, fix with screws, and fix the upper wardrobe pulley at the same time
5. After the upper and lower screws are fixed, use the traction screws to fix the lower wardrobe pulley in the lower seal to complete the installation
6. Note: When installing the lower pulley, the pulley shrapnel enters.
The importance of wardrobe pulley
1. The wardrobe pulley is a very small hardware in the wardrobe, but it plays a very important role. There are many kinds of pulley materials on the market, including plastic pulley, metal pulley and glass fiber pulley. The plastic pulley is hard in texture, but it is easy to break. It will have astringency, hardness and poor push-pull feeling when used for a long time. The metal pulley is strong in strength. The disadvantage is that it is easy to produce noise when it contacts with the rail. The wardrobe pulley made of glass fiber is relatively good pulley material at present due to its toughness, wear resistance, smooth sliding and durability.
2. The wardrobe pulley directly affects the overall amount of the wardrobe, and is also the key reason for affecting the life of the wardrobe sliding door. The design life of the pulleys of large brand wardrobe is about 15 years, while the pulleys of some counterfeit products may break within 2-3 months, seriously affecting the use of sliding doors. The wardrobe pulley consists of two parts: the upper wheel and the lower wheel. It is installed on the bottom wheel in two ways, one is concealed, the other is external. The concealed installation of the bottom wheel means that the bottom wheel is installed under the door. After it is placed on the guide rail, the bottom wheel can not be seen from the front or rear of the door.
3. The wardrobe pulley made of glass fiber is fashionable and durable at present. The pulley track technology is complex. Users should pay attention to whether the pulley is smooth, pressure-resistant, wear-resistant and reliable. Generally, the wardrobe pulley needs to be pushed and pulled more than 60000 times at home.
The above is an introduction to how to install the wardrobe pulley and related knowledge. Now most of the wardrobes are pulley type, so we can look at the importance and installation method of the wardrobe pulley shared by Opaq. I hope it will help you. Follow Opec to learn more about wardrobe pulley.